GE MOV 2000, Instructions Manual, Page: 63 / 78

8. KEYPAD AND DISPLAY
60 MIV Digital Multifunctional Protective Relay GEK-106271
8.2. SETTINGS GROUP
This group allows to view and modify the MOV settings. It is accessed by pressing the SET key when the
MOV is in stand-by status. The display will then show the following message:
Pressing keys
↑ ↓
we can see this message :
The menu tree for the MOV settings is shown in the following table. Note that to go down a level in the
tree you have to press the ENT key and that to go up you have to press the CLR key.
TABLE 7. HMI Menu. Settings and ranges
Level 1 Level 2 Level 3 Valid Range
•
VIEW
PROTECTION
SETTINGS
•
GENERAL
SETTINGS
•
RELAY STATUS
In Service
Out of Service
•
MODIFY
PROTECTION
SETTINGS
IDENTIFICATION
(View, do not modify) Alphanumerical
chain of up to 20
characters
•
FREQUENCY
50/60 Hz
•
LINE VT RATIO
1-4000 in steps of 1
•
V1 VT RATIO
1-4000 in steps of 1
•
V2 VT RATIO
1-4000 in steps of 1
•
ACTIVE TABLE
1-3
•
PERMISSIONS X
FUNCTION
•
FUNCTION A
•
Permitted
•
No Permitted
•
FUNCTION A’
•
Permitted
•
No Permitted
•
FUNCTION B
•
Permitted
•
No Permitted
•
FUNCTION C
•
Permitted
•
No Permitted
•
FUNCTION D
•
Permitted
•
No Permitted
•
FUNCTION E
•
Permitted
•
No Permitted
•
FUNCTION F
•
Permitted
•
No Permitted
•
FUNCTION G
•
Permitted
•
No Permitted
•
FUNCTION H
•
Permitted
•
No Permitted
•
FUNCTION I
•
Permitted
•
No Permitted
•
FUNCTION J
•
Permitted
•
No Permitted
VIEW PROTECTION
SETTINGS
MODIFY PROTECTION
SETTINGS