Using Your Cooktop
Radiant Cooktop
10
Using the
bridge surface
unit
Make sure the pan rests flat on the glass cooktop.
When the select knob points to
, the
CONTROL
knob controls both the left front
surface unit and the bridge area.
Choose pans that match the circle/bridge area
as closely as possible.
When the select knob points to
,the
CONTROL
knob controls the left front
surface unit only.
NOTE:
You can create an oblong heated area by using
the left rear unit in addition to the front unit bridge
combination.
Using the
dual surface
unit
The right front surface unit has 2 cooking sizes to select
from so you can match the size of the unit to the size of
the cookware you are using.
To use the large (9 inch) surface unit, turn the
selector knob clockwise to
. Push in and
turn the control knob to the desired setting.
The unit will heat the entire area contained by
the larger circle.
To use the small (6 inch) surface unit, turn the
selector knob counterclockwise to . Push in
and turn the control knob to the desired setting.
The unit will only heat the area inside the
smaller circle.
Small 6
″
surface unit
setting
Large 9
″
surface unit
setting
