GE Moisture monitor series 3, Programming Manual

Page: 65 / 99

Advanced Programming 3-37
March 2008
Table 3-10: Measurement Modes, Required Inputs and Configuration Information
To measure: Use these inputs: Provided by:
(see page 3-35)
Also configure the channel for:
RH
Temperature
and moisture
TF Probe TF (H, T, & P)
M Series Probe w/ temp. option Mxx (H) and Kt (T)
M Series Probe & constant
temperature
Mxx (H & T)
PPMv
Moisture and
pressure
TF Probe w/ pressure option TF (H, T & P)
M Series Probe and auxiliary
pressure input
Mxx (H) and X1 (P)
M Series Probe and pressure
constant
Mxx (H) and Kp (P)
PPBv
Moisture and
pressure
TF Probe w/ pressure option TF (H, T & P)
M Series Probe and auxiliary
pressure input
Mxx (H) and X1 (P)
M Series Probe and pressure
constant
Mxx (H) and Kp (P)
PPMw
Moisture,
temperature
and saturation
constant
TF Probe w/ temperature
option and saturation constant TF (H & T) & refer to page 3-28
for saturation constant
M Series Probe w/ temperature
option & saturation constant Mxx (H & T) & refer to page 3-28
for saturation constant
TF Probe, constant temp. and
saturation constant TF (H), Kt (T); refer to page 3-28
for saturation constant
M Series Probe, constant temp.
and saturation constant M (H), Kt (T) & refer to page 3-28
for saturation constant
MCF/IG
Moisture and
pressure
TF Probe w/pressure option TF (H, T & P)
M Series Probe and auxiliary
pressure input
Mxx (H) and X1 (P)
M Series Probe and pressure
constant
Mxx (H) and Kp (P)
MCF/NG
Moisture and
pressure
TF Probe w/ pressure option TF (H, T & P)
M Series Probe and auxiliary
pressure input
Mxx (H) and X1 (P)
M Series Probe and pressure
constant
Mxx (H) and Kp (P)
PPMv/NG
Moisture and
pressure
TF Probe w/ pressure option TF (H, T & P)
M Series Probe and auxiliary
pressure input
Mxx (H) and X1 (P)
M Series Probe and pressure
constant
Mxx (H) and Kp (P)