GE MM3, Instruction Manual, Page: 90 / 230

5–10 MM3 MOTOR MANAGER 3 – INSTRUCTION MANUAL
S1 CONFIGURATION CHAPTER 5: SETPOINTS
These settings are used to clear the timers on the A4 STATISTICS Ö TIMERS actual value
page.
5.2.8 Programmable
Message
PATH: S1 CONFIGURATION
ÖØ
PROGRAMMABLE MESSAGE
Enter a 40-character message using the VALUE and STORE keys. The saved message is
displayed in the
A1 DATA ÖØ PROGRAMMABLE MESSAGE actual value page.
5.2.9 Preferences
PATH: S1 CONFIGURATION ÖØ PREFERENCES
The default message delay can be adjusted with the
DEFAULT MESSAGE DELAY
setpoint.
The brightness of the MM3 Motor Manager 3 display when not in use is set with the
DEFAULT MESSAGE BRIGHTNESS
setpoint.
CLEAR INTERLOCK
COUNTER: DISABLE
Range: Enable, Disable
CLEAR ENERGY USED:
DISABLE Range: Enable, Disable
] PROGRAMMABLE
] MESSAGE PROGRAMMABLE MESSAGE
SAMPLE TEXT Range: 40 ASCII characters
] STATISTICS
] DEFAULT MESSAGE
DELAY: 120 s Range: 3 to 300 seconds in steps of 1
DEFAULT MESSAGE
BRIGHTNESS: 60%
Range: 0 to 100% in steps of 20