GE MAC VU360 Operator'S Manual Download

Page: 16 / 168

Product Overview

Item

Option

Description

Change

Password

The Admin user or a local user can change their password. Displays only if

full user authentication is enabled.

Lock (Alt+L)

Locks the device. Displays only if full user authentication is enabled.

Log Out

Logs off the user. Displays only when you are logged on to the device.

Standby

Puts the device in standby mode to save battery power without turning it

off.

Power Off

Powers off the device.

NOTE

You can also power off the device by pressing the

Power

button on the

keyboard.

About

Displays the device software information.

Help

Displays help information about the device.

Battery Status

The battery icon shows the stored power of each battery. The power levels are shown

in 10% increments. The color of the icons change to show the level of battery life.
You may operate the device connected to the AC Mains power when the batteries

are removed. The device can also operate with a single battery installed to allow hot

swapping of the batteries without plugging into AC Power.

Table 3: Examples of Battery and Power Icon Status

Icon

Status

Description

Green

Connected to AC

Mains

The device is connected to the AC Mains power and the

batteries are charging.

White

Operating on

Battery

The device is only using batteries and the batteries are

discharging. The device is not connected to the AC Mains

power.

White

Batteries – Fully

Charged
Disconnected

from AC Mains

Shows that the batteries are fully charged and the device

is disconnected from the AC Mains power. When the device

is connected to the AC Mains power and the battery icon is

solid green, shows that the battery is fully charged.

MAC VU360

™

Resting ECG Analysis System

2088531-370-2

Summary of Contents for MAC VU360









































































































































































Search results

Summary of Contents for MAC VU360

Reviews:

Related manuals for MAC VU360

Brands by name

Popular brands

GE MAC VU360, Operator'S Manual

Search results

Summary of Contents for MAC VU360

Reviews:

Related manuals for MAC VU360

Brands by name

Popular brands