GE MAC 1600, Operator'S Manual, Page: 90 / 162

8-8 MAC™ 1600 2028451-182B
Managing Internal Storage
1. From the Main Menu , press F4 ( File Manager ).
The File Manager window opens.
2. Do one of the following.
„
To transmit select records, press F1 ( Select ) and select the
record(s) to be transmitted.
NOTE
You cannot transmit records that were imported to internal
storage. Imported records have a
Sent status of Recv .
„
To transmit all the records in storage, press F2 ( Select All ).
3. Press F4 ( Transmit ).
One of two things happens, depending on the number of locations
defined in
Communications Setup .
„
If only one location is defined, the files are transmitted to the
default location.
„
If multiple locations are defined, a window listing the locations
opens. Select the correct location and press
F6 ( OK ).
Exporting Records
Use the following instructions to export records from internal storage to
a Secure Digital card or to a shared directory.
NOTE
If exporting to an SD card, bear in mind that data access speeds may
vary depending on the SD card capacity and manufacturer. This may
affect the time required to read or write ECG records and other
information to the SD card. GE recommends the use of a 128 MB, 256
MB or 512 MB card manufactured by SanDisk
No additional setup is required to export data to an SD card. However,
before using these instructions to export to a shared directory, you must
do the following:
„
Purchase and activate the LAN to CardioSoft
(
LANC
)
option.
Refer to “Options Setup” on page 9-29 for details.
„
Define the shared directory settings on Communications Setup .
Refer to “Communication Setup” on page 9-19 for details.