GE MAC 1600, Operator'S Manual, Page: 113 / 162

System Configuration
2028451-182B MAC™ 1600 9-21
Device Identifies the type of device to be used to transmit data to
the location. Options are:
„
Serial
„
Modem
„
LAN
Modem and LAN will be available only if the corresponding
option has been activated.
This field becomes active only after a corresponding
location has been entered.
Phone Number Identifies the location’s phone number. Available only if the
selected device is Modem.
Protocol Determines the protocol to be used to communicate with
the device. Options are:
„
A5
„
CSI
Select CSI for MUSE connections and A5 for CardioSoft
connections.
Page 3
Modem Determines the type of modem to be used: internal
(optional) or external (Multitech MT5634ZBA Global
Modem, PN 2004831-001).
Modem Speaker Configures how an external modem’s speaker will be used:
„
On
„
Off
„
Dialing only
Applies only to external modems; internal modems have
no speaker.
Dialing Method Determines whether the system will use a tone or pulse to
dial.
Dialtone Required Determines whether the system must receive a dialtone
before dialing.
PIN Dialing Identifies whether a personal identification number (PIN) is
required to dial out. If this field is checked, the following
three fields need to be completed.
Delay Determines how long, in seconds, the system should
pause between dialing the Service Provider Number and
the PIN Number and between dialing the PIN Number and
the Outside Line.
Field Comment