GE LPS-D, Instruction Manual, Page: 329 / 436

GE Power Management LPS-D Line Protection System 14-
3
14 ALPS-SET PC SOFTWARE 14.1 INTRODUCTION
14
Click on the Change Setting button in the Change Settings – Protection dialog box. This displays the
Change Setting Value dialog box:
Figure 14–5: CHANGE SETTING VALUE DIALOG BOX
• Each setting may be individually changed by selecting the setting and entering the required value. The
range of the setting is displayed.
• The help command will give you detailed information about the setting to be changed.
• If a setting is selected that has specific values, the following dialog box is displayed.
Select Cancel to close the Change Settings – Protection dialog box.
Select Save Settings from the File menu. The Save Settings As dialog box is displayed since this is a new
settings file and has not yet been given a name. Select Cancel.
14.1.3 PRINT SETTINGS REPORT
Select Print Settings Report from the File menu. The Select Categories dialog box is displayed as follows.
Figure 14–6: SELECT CATEGORIES TO PRINT DIALOG BOX
Select the desired categories and click on the OK button.