GE LPS-D, Instruction Manual, Page: 304 / 436

11-
20
LPS-D Line Protection System GE Power Management
11.8 INFORMATION 11 ALPS-LINK USER GUIDE
11
11.8.10 PRESENT VALUES REPORT
When you select Present Values from the Report menu, ALPS-Link will pop-up a dialog box asking you to
enter the period value in seconds. ALPS-Link will monitor the present values and update these values at the
end of specified period continuously. These updated values are displayed through a special dialog box where
you can monitor these as long as you want. You can get a report of these values at any moment by selecting
the Generate Report option or stop monitoring by selecting Close option on the special dialog box monitoring
these values.
When General setting 108 is set to Primary (DISPLAYVAL = PRI), the Current values are in
amps and the voltage values are in KV. The ALPS-Link Present Value display will show the
units as V.
11.8.11 STATUS REPORT
Select Status from the Report menu to get the status report of various system components.
11.8.12 CONTACT STATUS REPORT
Select Contact Status from the Report menu to get the status of various contacts associated with the device.
The status is conveyed in the On/Off or Open/Close terminology.
11.8.13 LUI PASSWORD REPORT
Select LUI Password to get a report on passwords of all the three levels.
11.8.14 OPEN REPORT
The report must have been fetched earlier from the device and stored in the file. When you choose the Open
item in the Report menu, a File Open dialog box appears.
In the File Open dialog box, the File header part displays some information about the report file you are open-
ing. This helps you in picking the right report file. Select the file name, directory and the source from where you
want to read the report. The report will be displayed and you can print the report.
You can open multiple reports from multiple files and also can get new reports from the device for viewing
simultaneously.
11.8.15 SAVE REPORT
Any report fetched from the device can be saved in a file. You can choose the name and location of the file in
which you want to store the report. When you are in the report view, choose the Save As item from the Report
menu. A File Save dialog box appears for the selection of the file name and path. If you wish to save a report
when multiple reports are in view, ALPS-Link will save the report in the active window. So, make sure that the
report you want to save is in the active window before choosing the item.
11.8.16 PRINT REPORT
You can take a hard copy of any of the report fetched from the device. You can do this before storing the report
in a file or a report read from a file. When you are viewing multiple reports and choose the print item, ALPS-
Link will print the report in the active window. So, make sure the report you want a hard copy of is in the active
window.
NOTE