Getting Started
1-68
LOGIQ V2/LOGIQ V1
–
User Guide
Direction 5610736-100
Rev. 9
Entering a Patient List (For R1.1.x)
All patient information can be entered before starting an exam.
1. Press
Patient
to display the Patient Screen.
2. Press
New Patient
to erase the current patient data.
3. Select
Store All
if data from previous patient was not saved.
4. Enter the Patient ID.
5. Enter the patient and exam information.
6. Press
Register
.
7. Repeat above steps as required.
Select the patient from the Patient List. Select
Resume Exam
to
continue the last exam that was performed on the selected
patient.
Select
New Exam
to start a new exam on the selected patient.
Summary of Contents for LOGIQ V2
