GE LOGIQ Totus, Basic Service Manual, Page: 63 / 644

GE HealthCare CONFIDENTIAL
Direction 5936427 , Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 1 Introduction 1 - 31
1-9-3 Electrostatic discharge (ESD) prevention
DANGER
DO NOT TOUCH ANY BOARDS WITH INTEGRATED CIRCUITS PRIOR TO TAKING THE
NECESSARY ESD PRECAUTIONS:
1. ALWAYS CONNECT YOURSELF. THE ESD WRIST STRAP SHOULD BE CONNECTED
TO ONE OF THE TWO RECEPTICALS INTEGRATED ON THE FRAME, SPECIFICALLY
FOR THAT PURPOSE.
2. FOLLOW GENERAL GUIDELINES FOR HANDLING OF ELECTROSTATIC SENSITIVE
EQUIPMENT.
DANGER
RISK OF ELECTRICAL SHOCK. THE LOGIQ TOTUS MUST BE TURNED OFF.
AVOID ALL CONTACT WITH ELECTRICAL CONTACTS, CONDUCTORS AND
COMPONENTS. ALWAYS USE NON-CONDUCTIVE HANDLES DESIGNED FOR
THE REMOVAL AND REPLACEMENT OF ESD SENSITIVE PARTS. ALL PARTS
THAT HAVE THE POTENTIAL FOR STORING ENERGY MUST BE DISCHARGED
OR ISOLATED BEFORE MAKING CONTACT.
WARNING WARNING
RISK OF HEAT HAZARD. IF THE COVERS ARE REMOVED FROM AN OPERATING
LOGIQ TOTUS SOME METAL SURFACES (FOR EXAMPLE, THE GPU HEAT SINK ON
THE UBE-T) MAY BE WARM ENOUGH TO POSE A POTENTIAL HEAT HAZARD EVEN
WHILE SHUT DOWN.
Figure 1-1 ESD Receptacle