GE LOGIQ Totus, Basic Service Manual

Page: 128 / 644

GE HealthCare CONFIDENTIAL
Direction 5936427 , Rev. 1 LOGIQ Totus Basic Service Manual
3 - 46 Section 3-7 - Setting Up Connectivity and Tips
3-7-3-4 Network Proxy
Proxy to configure a proxy server.
Table 3-13 To Configure Add Scanner Network Properties - Proxy
Step Corresponding Graphic
1. Navigate to
Connectivity > Connection Manager > Network .
2. Select
Proxy .
3. To use a proxy server, enable
Use Proxy
.
4. When Use Proxy is enabled, in
Proxy Server
, enter a proxy server address of the facility.
5. When Use Proxy is enabled, in
Proxy Port
, enter a port number for the proxy server.
6. To use proxy credentials, enable
Use Proxy Credentials
.
7. When Use Proxy Credentials is enabled, in
Proxy User Name
, enter an account user name for the proxy server.
8. When Use Proxy Credentials is enabled, in
Proxy Password
, enter an account password for the proxy server.
9. Select
Done
.
10. Continue to "MyComputer Device" on page 3-47.