GE LOGIQ Totus, Basic Service Manual

Page: 111 / 644

GE HealthCare CONFIDENTIAL
Direction 5936427 , Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 3 LOGIQ Totus Setup 3 - 29
3-5-14 Login
At login, you are notified that “You are accessing a diagnostic medical device that is provided by
authorized usage only. Data stored on this device may be subject to various regulations including but
not limited to regulations which govern disclosure and privacy of this data. By using this device you are
acknowledging that you are authorized to do so and are trained in appropriate use and regulatory
guidelines.”
NOTE: Touch Keyboard pop-ups automatically when edit boxes are focused. Please use it if you need
to type any texts.
After you have established your password, follow these steps to login.
1.) Type your user name in the
Operator field.
2.) Type your password in the Password field.
3.) Press OK to login, or Cancel to cancel login.
You can change the password when first logging onto the LOGIQ Totus.
NOTICE
The System Administrator manages system groups, users, and permissions. After you have been
added as a valid user, the System Administrator assigns you a temporary password. When you log into
the LOGIQ Totus for the first time, you will be prompted to change your password.
Figure 3-17 Login Window