GE LOGIQ P6, Service Manual

Page: 83 / 478

GE H
EALTHCARE
D
IRECTION
5245279, R
EVISION
3 LOGIQ™ P6/P6 P
RO
S
ERVICE
M
ANUAL
Section 4-3 - General Procedure 4 - 3
4-3-1-1 Scanner Power On (cont’d)
3.) Press the ON/OFF key at the front of the System once.
4-3-2 Power Off / Shutdown
NOTE: After turning off a system, wait at least ten seconds before turning it on again. The system may not be
able to boot if power is recycled too quickly.
4-3-2-1 Scanner Shutdown
1.) Press the On/Off Key at the front of the System once to display the SYSTEM - EXIT menu.
2.) Select Shutdown from the SYSTEM - EXIT menu.
Figure 4-2 Power On/Off Standby Switch Location
Figure 4-3 System Exit Menu for Power Down