GE LOGIQ A100, Technical Publication

Page: 201 / 408

OB Report Page
185
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Tokyo University Report Page (cont’d)
Exam date, ID, Name, Referral, Referred For, Age,
Gravida and Para: These fields are identical to the US
report page as described on page 176.
Pregnancy Origin: In the pregnancy origin field, select
either LMP, DGA, EDC or BBT. The selected field
becomes active. Enter the date of origin of pregnancy as
described below.
LMP: Enter the date from the first day of the patient’s last
menstrual period prior to pregnancy.
DGA: Enter the Diagnostic Gestational Age in Weeks
and Days, Eg. 12W4D.
EDC: Enter the estimated date of confinement.
If the EDC has been calculated in the OB measurement
menu, it automatically included in the report page.
BBT: Enter the date from the first day of the patient’s
LMP prior to pregnancy Eg. LMP date + 2 weeks.
If the four-digit format is used to enter ‘YEAR’, the
system ignores the first two digits of the year.
The dates for LMP, EDC and BBT should be in the
selected format Eg. YY/MM/DD (96/05/08). This format
can be selected in the Installation Setup Menu by
pressing
CONTROL S1.
CGA?: The Composite Gestational Age is the average of
the Gestational Ages calculated from different ultrasound
measurements.
Indicate Y (Yes) if the measurement should be included,
N (No) if the measurement should not be included and
D (Delete) if the measurement should be deleted from
the summary page. This response clears the result fields
and deletes the measurement data and any ratio
calculations involved.
‘N’ appears on the display by default if no measurements
have been entered. ‘Y’ automatically replaces ‘N’ once a
measurement has been entered. ‘D’ is reversible if the
measurement has not been deleted from the averaging
page.
.
.
Hints