GE LOGIQ A100 Technical Publication Download

Page: 123 / 408

Basic Measurements

107

LOGIQ

100 User Manual

2211157–100 Rev 0

Ellipse Method

An ellipse can be used to measure the circumference
and area of an organ.

To measure the Circumference/Area with an ellipse:

Press

FREEZE to stop image acquisition.

Press the

MEASUREMENT key once to display the

measurement menu and an open ended “ ” cursor
appears on the screen.

Use the

TRACKBALL to move the open ended “ ” cursor

to either end of the axis of the area to measure.

Press

SET to fix the start point cursor. Distance in mm

appears on the left side of the screen.

Use the

TRACKBALL to move the second cursor to the

measurement end point.

Press the

NEAR (ELLIPSE) up/down key, an ellipse

having an initial circle shape appears.

Meas

continued

Summary of Contents for LOGIQ A100
























































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands

GE LOGIQ A100, Technical Publication

Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands