GE H
EALTHCARE
D
IRECTION
2286865, R
EVISION
14
LOGIQ™ 7 S
ERVICE
M
ANUAL
4-4
Section 4-2 - General Procedure
2.) After initialization is complete, all lighted buttons on the Control Panel light and the default B-Mode
screen or Patient screen (no probes are connected) is displayed on the monitor display.
4-2-2-3
Entering Maintenance Mode
4-2-2-3-1
R6.2.x or later
1.) Insert the service dongle into any USB port.
2.) Wait for scanner boot-up.
3.) Tap ON/OFF the power switch.
4.) Click on
Exit.
5.) Enter the proper password to enter the maintenance mode.
6.) Click on
OK
.
Figure 4-4 Clicking on Exit
Figure 4-5 Clicking on OK
Summary of Contents for LOGIQ 7
