NOTICE
Cleaning. Keep the exterior of the instrument dry and clean. Wipe
regularly with a soft damp tissue and, if necessary, a mild cleaning
agent. Let the instrument dry completely before use.
General cleaning procedure
When cleaning the SEMIPHOR TRANSPHOR UNIT series make sure to:
•
not autoclave any part.
•
not wash the unit in a dishwasher.
•
not immerse the unit in water!
Rinse the cathode in the cover and the anode in the base with distilled water. Let the
unit air dry completely.
If using radioactive reagents, decontaminate the unit with a cleaning agent. Never use
abrasive cleansers.
Cleaning before planned
maintenance/service
To ensure the protection and safety of service personnel, all equipment and work areas
must be clean and free of any hazardous contaminants before a Service Engineer starts
maintenance work.
Please complete the checklist in the On Site Service Health and Safety Declaration Form
or the Health and Safety Declaration Form for Product Return or Servicing, depending on
whether the instrument is going to be serviced on site or returned for service, respectively.
Copy the form you need from
Section 8.3 Health and Safety Declaration Forms, on page 65
.
SEMIPHOR TRANSPHOR UNIT series Operating Instructions 29281777 AA
55
6 Maintenance
