GE L60, Instruction Manual, Page: 337 / 498

GE Multilin L60 Line Phase Comparison Relay 7-1
7 COMMANDS AND TARGETS 7.1 COMMANDS
7
7 COMMANDS AND TARGETS 7.1COMMANDS 7.1.1 COMMANDS MENU
The commands menu contains relay directives intended for operations personnel. All commands can be protected from
unauthorized access via the command password; see the
Password Security section of Chapter 5 for details. The following
flash message appears after successfully command entry:
7.1.2 VIRTUAL INPUTS
PATH: COMMANDS VIRTUAL INPUTS
The states of up to 64 virtual inputs are changed here. The first line of the display indicates the ID of the virtual input. The
second line indicates the current or selected status of the virtual input. This status will be a logical state ‘Off’ (0) or ‘On’ (1).
7.1.3 CLEAR RECORDS
PATH: COMMANDS CLEAR RECORDS
COMMANDS
MESSAGE
COMMANDS
VIRTUAL INPUTS
MESSAGE
COMMANDS
CLEAR RECORDS
MESSAGE
COMMANDS
SET DATE AND TIME
MESSAGE
COMMANDS
RELAY MAINTENANCE
COMMAND
EXECUTED
COMMANDS
VIRTUAL INPUTS
Virt Ip 1
Off
Range: Off, On
↓
↓
MESSAGE
Virt Ip 64
Off
Range: Off, On
COMMANDS
CLEAR RECORDS
CLEAR FAULT REPORTS?
No
Range: No, Yes
CLEAR EVENT RECORDS?
No
Range: No, Yes
CLEAR OSCILLOGRAPHY?
No
Range: No, Yes
CLEAR DATA LOGGER?
No
Range: No, Yes