GE L60, Instruction Manual, Page: 19 / 498

GE Multilin L60 Line Phase Comparison Relay 1-9
1 GETTING STARTED 1.3 ENERVISTA UR SETUP SOFTWARE
1
2. The Display Properties window will open with a status indicator on the lower left of the enerVista UR Setup window.
3. If the status indicator is red, verify that the Ethernet network cable is properly connected to the Ethernet port on the
back of the relay and that the relay has been properly setup for communications (steps A and B earlier).
If a relay icon appears in place of the status indicator, than a report (such as an oscillography or event record) is open.
Close the report to re-display the green status indicator.
4. The Display Properties settings can now be edited, printed, or changed according to user specifications.
Refer to Chapter 4 in this manual and the enerVista UR Setup Help File for more information about the
using the enerVista UR Setup software interface.
842743A1.CDR
Expand the Site List by double-clicking
or by selecting the [+] box
Communications Status Indicator
Green LED = OK, Red LED = No Communications
UR icon = report open
NOTE