KTR-11 Face/Badge Reader
Installation Manual
18
Site programming
Refer to the decal on the inside of the KTR-11’s door for assigning the unit’s site number in the KTR-11
system.
Multiplexer function keys
1
mplx
Toggles the keypad between Digiplex and multiplexer view control modes.
run
Selects automatic switching of videos in lower right window f current view; also used in setup of motion detection
areas.
sel
Used to select an active multiplexer.
zoom
Toggles between a full screen view and a 2x view of the selected video, if available on the specific multiplexer.
live
Used to view the live video inputs in any of the display modes; also used during setup of motion detection areas
vcr
Selects VCR output for monitoring during taping or VCR input for viewing during playback. Also used in setup of
motion detection areas.
full
Used by some multiplexer types to restore full view.
view
Toggles between selected views.
fn
Reserved for future development.
1.
The mutiplexer keys may function differently, or not at all, on some models of multiplexers.
Table 1.
KTD-304A/304RA key functions (continued)
Key
Explanation
