GE JXDD43, User Manual

Page: 28 / 36

Cleaning Guide
Note: Let all components cool before touching or handling.
Part
Solid Disk Component
Solid Disk Elements
Grill Element
Porcelain Drip Pan*
Porcelain Grease Well*
Grease Collector Jar
Griddle
to Use
Hot Soapy Water
Soft Sponge
Soft Cloth
Soap and Water
Cleansing Powder
Soap-Filled Scouring
Cello Polish
None Required
Hot Soapy Water
Soap-Filled Scouring
Dishwasher-Safe
Hot Soapy Water
Soap-Filled Scouring
Hot Soapy Water
Plastic Scouring Ball
Dishwasher-Safe
Hot Soapy Water
Soft Cloth
Plastic Scouring Ball
General Directions
DO NOT USE steel wool
or abrasives on the
stainless steel of
module.
Clean the stainless steel finish and the stainless steel trim
ring that surrounds the solid disk element by following the
directions below.
For light soil, wash and rinse with soapy water and then
polish with a dry cloth.
For heavy soil, sprinkle baking soda on soiled area. Cover
with a moist cloth or paper towel and allow to sit for at least
30 minutes. Then wipe up the
soda, rinse with a
cloth and polish with a cloth.
-
Solid disk elements should be washed with a damp cloth and then dried. Finish
over lightly with cooking oil when cool. Clean dirty solid disk elements a
cleansing powder or a scouring pad. The matte black surface can be maintained by
treating it periodically with the Cello
polish. It is available from your GE supplier.
Use the applicator to apply a very thin coating of the polish to the entire element surface.
Turn the element on high for several minutes to bake the polish on the element. When the
element is cool, rub lightly with a cloth or paper towel to remove any excess polish.
DO
NOT USE a
Spatters and spills bum away when the element is heated.
dishwasher to clean the At the end of a meal, remove cookware from the grill and
element coils. heat the soiled element at HI. Let the soil burn off about a
minute and switch the elements to OFF. Avoid getting
cleaning materials on the element.
●
DO NOT handle the element before it is completely cooled.
●
DO NOT clean the plug-in element in a self-cleaning oven
or immerse it in any kind of liquid.
Let grill cool. Remove element and lift out drip pan. The drip pan may be cleaned
using one of the methods at left.
Can be cleaned in dishwasher.
Wipe clean after each use. Make sure drain hole is not blocked. Use cotton swab or
toothpick to clean drain hole. DO NOT fill the well with water to clean.
Scoop out grease with large spoon. Set jar in pan of warm water to grease if desired.
Replace with any wide mouth canning jar. Do not use a mayonnaise jar, which could
break when hot grease drips into it.
DO NOT USE a dishwasher
●
DO NOT handle the griddle before it has completely cooled.
to clean the griddle.
●
DO NOT clean the griddle in a self-cleaning oven.
DO NOT use abrasive Keep water out of electrical plug box. To prolong the life
cleaners. of the griddle, hold the electrical plug box part of the
griddle out of the water when cleaning.
*Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration. of these materials
should be cleaned up as soon as safely possible after cooking.
28