background image

Summary of Contents for JMP31WC3WW

Page 1: ...screwdriver Hand or Electric Drill 1 8 Drill Bit Hand or Saber Saw Tape Measure Straight Edge Pencil ADDITIONAL MATERIALS This range is designed to hang from the countertop It does not rest on the floor If countertop is less than 1 1 2 thick reinforcing braces must be installed under the countertop on each side See Figure 1 NOTE Remove all protective plastic coating from door frame before installa...

Page 2: ...27RAD Almond This kit win fill in the space between the back of the range and the wal See Figures 2 3 and 4 SCREW _ FILLER STRIP SPEE_ Fig 2 T COUNTERTOP WITH OR WITHOUT BACKSPLASH 25 L Fig 3 NOTE If the distance from the back wall to the front of the counter backsplash Dimension A in Fig 4 is greater than 1 1 8 there will be a small gap between the wall and the edge of the beckguard This is norma...

Page 3: ...or bare copper to the branch circuit grounding conductor green or bare in accordance with local codes If the branch circuit grounding conductor is aluminum see _WARNING note 3 Connect the range neutral white lead to the branch circuit neutral white or gray in accordance with local codes If the branch circuit neutral conductor is aluminum see WARNING note 4 Connect the range red lead to the branch ...

Page 4: ...der kit JX27RWH white kit JX27RBK black or kit JX27RAD almond Follow installation instructions in the kit NOTE The backsplash kit attaches to the counter Fig 6 CAUTION The bottom of the trim provides an opening for cooling air J n to enter the cabinet This opera g should never be blocked REPLACE OVEN DOOR 5 Hold the door over the hinges with the slots at the bottom edge of the door lined up with t...

Reviews: