25
GEAppliances.com
Problem
Possible Causes
What To Do
“LOCK DOOR” flashes
The self-clean cycle has been
• Close the oven door.
in the display
selected but the door is not
closed.
LOCKED DOOR light
The oven door is locked
•
Press
the
CLEAR/OFF
pad. Allow the oven to cool.
is on when you want
because the temperature
to cook
inside the oven has not
dropped
below
the
locking
temperature.
´)³DQGDQXPEHU
You have a function
•
Press
the
CLEAR/OFF
pad. Allow the oven to cool for one
or letter” flash in
error
code.
hour. Put the oven back into operation.
the display
If the function code repeats.
• Disconnect all power to the range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Display goes blank
A fuse in your home may be
• Replace the fuse or reset the circuit breaker.
blown or the circuit
breaker
tripped.
The clock is in the
•
See
the
Special features of your oven control
section.
black-out mode.
Display flashes
Power
failure.
• Reset the clock.
Unable to get the
Oven control pads were
•
The
BAKE
and
BROIL HI/LO
pads must be pressed
display to show “SF”
not
pressed
properly.
at the same time and held for 3 seconds.
Power outage,
Power outage or surge.
• Reset the clock. If the oven was in use, you must reset
clock flashes
it by pressing the
CLEAR/OFF
pad, setting the clock
and resetting any cooking function.
“Burning” or “oily”
This is normal in a new oven
• To speed the process, set a self-clean cycle for a
odor emitting from
and will disappear in time.
minimum of 3 hours. See the
Using the self-cleaning
the vent
oven
section.
Strong odor
An odor from the insulation
• This is temporary.
around the inside of the
oven is normal for the first
few times the oven is used.
Fan noise
A cooling fan may
• This is normal. The cooling fan will turn off and on.
