JK955BF/CF/WF
GE Profile
™
27" Built-In Double Oven
Dimension and installation information are shown in inches.
Dimensions and Installation Information
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
R
Listed by
Underwriters
Laboratories
Specification Revised 1/05
220352
KW Rating
240V
6.8
208V
5.1
Breaker Size
240V
30 Amps
208V
30 Amps
Cabinet
27"
A - Cabinet Width Required
27" min.
B - Minimum Cabinet Depth
23-5/8"
C - Opening Width
25" min. - 25-1/4" max.
D - Opening Height
50-1/8" max.
E - Recommended Minimum
Cutout Location from Floor
13-1/4"
Oven
F - Overall Depth
23-5/8"
w/o trim
G - Overall Height with trim
50-1/4"
51"
H - Overall Width
26-5/8"
Note:
Cabinets installed adjacent to wall ovens must have an adhesion spec of at
least a 194°F temperature rating. For 27” built-in single ovens, if marks, blemishes
or the cutout opening is visible above the installed oven, it may be necessary to
add wood shims under the runners and front trim until the marks or openings
are covered.
Electric wall ovens are not approved for installation with a plug and receptacle.
They must be hard wired in accordance with installation instructions
.
Installation Information:
Before installing, consult installation instructions packed
with product for current dimensional data.
10
Locate
junction
box
for 27"
models
either
5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
6015 Built-In Double Ovens A,B,C
(Pub. 1-G003 pg 105A) May 12, 1993
Allow 3/4"
for overlap
over all edges
of cutout
A
Minimum
cutout
location
from floor
D
E
2" X 4" or
equiv. runners
(cutout floor)
20" MIN.
door opening
allowance
B
C
H
F
G
Conduit
49" long
20
CL
(Must Support 275 LBS.)
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
18"
over centerline
of cabinet
