OVEN CONTROL, CLOCK
To Set the Clock
The clock must be set for the
1. Press the
automatic oven timing functions
CLOCK
CLOCK pad.
to work properly. The time of day
cannot be changed during a Timed
Bake cycle.
2. Press the INCREASE
or DECREASE pad
to set the time of day.
Timer
To Set the Timer
The timer is a minute timer;
it does not control oven operations.
The maximum setting on the timer
is 9 hours and 55 minutes.
1. Press the TIMER
The timer will start automatically
ON/OFF pad.
within a few seconds of releasing the
or DECREASE pad. The
timer, as you are setting it, will display
2. Press the INCREASE
seconds until one minute is reached.
or DECREASE pad
Then it will display minutes and
to set the amount of
seconds until 60 minutes is reached.
time on the timer.
After 60 minutes, it will display hours
now appears in display) and
minutes until the maximum time of
9 hours and 55 minutes is reached.
Reset the Timer
To Cancel the Timer
If “TIMER” is displayed, press the INCREASE or
Press and hold the TIMER ON/OFF pad until the
DECREASE pad until desired time is reached.
word “TIMER” disappears from the display.
If “TIMER” is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions above
to set the timer.
End of Cycle Tone
Power Outage
The end of cycle tone is a series of three beeps
After a power outage, when power is restored, the
followed by one beep every six seconds.
If you would
display
flash and time shown will no longer be
like to remove the signal that beeps every six seconds,
correct-for example, after a 5-minute power
press and hold the
pad for 10 seconds.
interruption the clock will be 5 minutes slow.
To return the signal that beeps every six seconds,
The display flashes until the clock is reset. All other
press and hold the
pad for 10 seconds.
functions that were in operation when the power went
out will have to be programmed again.
9
