7
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
ge.com
Oven Control, Clock and Timer Features and Settings
Automatic Oven Light
This lights anytime the oven has been
programmed using the
Cooking Time
or
Start Time
functions.
Oven Light On/Off Pad
Touch this pad to turn the oven light on or
off.
– Pad
Short taps to this pad will decrease the time
or temperature by small amounts. Touch
and hold the pad to decrease the time or
temperature by larger amounts.
+ Pad
Short taps to this pad will increase the time
or temperature by small amounts. Touch
and hold the pad to increase the time or
temperature by larger amounts.
Self Clean Pad
Touch this pad to select the self-cleaning
function. See the
Using the self-cleaning
oven
section.
Clean Light
Flashes while in edit mode—you can change
the length of time for the self-cleaning cycle
at this point. Glows when the oven is in the
self-cleaning cycle. After the self-cleaning
cycle, the light will turn off. Unlatch the door.
Clear/Off Pad
Touch this pad to cancel
ALL
oven
operations except the clock and timer.
Broil Hi/Lo Pad
Touch this pad to select the broil function.
Broil Light
Flashes while in edit mode—you can switch
from
Hi
to
Lo Broil
at this point. Glows when
the oven is in broil mode.
Indicator Lights (on some pads)
EDIT
mode lasts several seconds after the last
pad press.
Start Time On/Off
and
Cooking Time
On/Off
will be the only pads lit if either of
these options is selected. (Example:
Start
Time
is selected with
Bake
—the
Start Time
pad will remain lit until the clock reaches the
programmed time, at which point it will turn
off and the
Bake/Temp Recall
pad light will
light up).
Power Outage
If a flashing time is in the display, you have experienced a
power failure. Reset the clock.
To reset the clock, touch the
CLOCK
pad. Enter
the correct time of day by touching the
+
or
–
pads. Touch the
START/ON
pad.
