KTS-55 Alphanumeric Message Generator
1037482C / February 2003
Technical Support: 800-469-1676
1
This unit generates camera identification information and contact closure messages for display on a monitor.
I
NSTALLATION
See Figure 1 and perform the following:
1)
Connect the video input cable to the
unit’s video input BNC connector ( ).
2)
Connect the video output cable to the
unit’s video output BNC connector ( ).
3)
Connect the provided power supply to
connectors 1 and 2 of the unit’s
terminal strip ( ).
Figure 1. Cable connections
P
ROGRAMMING
The generator provides five programming mode screens for entering alphanumeric characters. The first screen is labeled
Default. The remaining four screens are labeled Contact 1, Contact 2, Contact 3, and Contact 4. See Figure 2.
Note:
The screen labels will appear only when you are in programming mode. When the unit is not in programming mode, the text entered on the
Default screen is displayed continuously. The text entered on each of the contact screens is displayed only when an associated contact closure occurs.
When more than one contact closure occurs simultaneously, the text for the lowest numbered contact will be displayed.
Figure 2. Programming mode screens
