GE IDP-1111, User Manual, Page: 94 / 114

Legend
User Manual
86
Figure 58. Legend web-based login screen
9. At the Legend web-based firmware update page:
a. Click the Browse button to locate the update file.
b. Click File | Open to populate the filename entry.
c. Click Send File .
Figure 59. Legend web-based firmware update page
10. At this point, ensure that the update process is not interrupted . The unit is not safe to interact with until
after the system is successfully rebooted. Wait until after you see the color bar and splash screens on
the monitor screen, and live video is again showing normally.
You may see the color bars or a blank or gray screen for up to five minutes. Do nothing until you see
live video again. Only after 10 minutes have elapsed without a successful update should you cycle
power to restart the dome.
After you click Send File , the update can continue processing in one of two ways:
• In most cases, a notice will appear on the security monitor screen saying that the update is in
progress, while another message appears on the computer screen in Internet Explorer saying
that the update is proceeding successfully.