GE IDP-1111, User Manual, Page: 55 / 114

Chapter 5
Advanced programming
47
Advanced page
The Advanced page of the Presets page (under the Actions menu) allows you to change a camera’s feature
settings for individual presets.
To access the Advanced page of Presets , select Actions , Presets , and Advanced .
Figure 30. Advanced page
Note: Remember to select OK to save any changes you make on the page.
No. The No. drop-down box allows you to select the preset number that you want to program.
Title. The Title box shows you the existing title for the selected preset number. You can customize the
default title on the Display page.
Use custom camera state for preset. The Use custom camera state for preset feature overrides the
settings that were set for the camera’s normal operation under Camera | Settings , if checked. You must
check this feature to make the other features on this page available.
Night mode. For individual presets, you can use the Night mode feature to change the camera’s Day/Night
setting. See Page1 page on page 34 for details about the Day/Night feature and its interactions with the
Exposure feature settings. Choices are Off (default) and On.
When you turn on the Night mode feature, you are telling the camera to override the normal Day/Night
operating setting as follows:
• Auto : If the Day/Night feature is set to Auto under Camera | Settings , then the Night mode feature
will use the Day/Night setting customized for the preset for 5 to 10 seconds. After 5 to 10 seconds,
the camera will revert to the normal operating setting and adjust for the current light conditions.
• Manual : If the Day/Night feature is set to Manual under Camera | Settings , then the Night mode
feature will use the Day/Night setting customized for the preset until the preset is left. After the preset
is left, the camera will revert to the Day/Night setting that it was using before the preset was called.
• Disabled : If the Day/Night feature is set to Manual under Camera | Settings , then the Night mode
feature will do nothing.