GE IDP-1111, User Manual, Page: 32 / 114

Legend
User Manual
24
You can turn on one installer passcode, one admin passcode, and one operator passcode. They have the
following permissions:
• Installer : The installer passcode allows access to all dome features.
• Admin : The admin passcode allows access to all dome features, except passcodes and firmware
upgrades.
• Operator : The operator passcode allows no access until it is granted access to specific features on an
area-by-area basis.
To access the Passcode page, select Setup and Passcode .
Figure 14. Passcode page
Note: Remember to select OK to save any changes you make on the page.
Installer passcode. The Installer passcode feature allows the installer to operate and change all dome
features, including all three default passcodes (installer, admin, and operator). There is a 4-digit limit.
Admin passcode. The Admin passcode feature allows your system administrator to operate and change all
dome features, except passcodes and firmware upgrades. There is a 4-digit limit.
Operator passcode. The Operator passcode feature allows the operator to operate and change only
those dome features that have been enabled for the operator passcode. There is a 4-digit limit.
Operator access options. The Operator access options feature allows the installer to choose which
features an operator has access to operate and change. Choices are as shown onscreen.