GE IC755CxW07CD SERIES, User Manual

Page: 33 / 62

4.5 Mounting on a VESA Arm
The QuickPanel
+
can be installed on a commercially available Video Electronics
Standards Association (VESA) MIS-D arm, stand, or apparatus that is listed to comply
with the UL1678 standard.
Refer to the mounting arm
manual for instructions.
� �
To mount the QuickPanel + : use the mounting holes located on the back of the
unit as displayed in the following figures.
The IC755CxW07CDx mounting holes attach with M4 screws that are 6 mm
(0.24 in) or less in length.
The IC755CxSxxCDx mounting holes attach with M4 screws that are 8 mm
(0.32 in) or less in length.
Torque Range for Mounting M4 Screws
Unit Torque Range
IC755CxW07CDx 0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
IC755CxSxxCDx 1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
75 mm
75
m
m
75 mm
(2.95 in)
7
5
m
m
(2
.9
5
i
n
)
IC755CxW07CDx VESA Mounting Holes
100 mm
(3.94 in)
1
0
0
m
m
(3
.9
4
i
n
)
IC755CxSxxCDx VESA Mounting Holes
Installation GFK-2847F User Manual 33
For public disclosure