GE Hydran 201i, Instruction Manual

Page: 79 / 300

Using the Keypad’s Keys According to Each Mode
Part 17997 Rev. 6, March 2011 4-7
4.2.5.2 Short Power-up (Power-off Shorter Than Five Minutes)
In this sequence, the self-test is not executed. After the message System;Initialization, the
Main Display mode is immediately displayed.
4.2.5.3 First Power-up (After Reconnection of Battery)
In this sequence, the H201T i requests the values listed in Table 4-3 on page 4-7 before
executing the self-test sequence. The Main Display mode is then displayed (the H201T i
will not be in service until these values are entered).
Table 4-3 - Values Requested During the First Power-up Sequence
Note: The dialog of the first power-up can only be performed using the H201Ti’s keypad,
not the Hydran Host software.
4.3 USING THE KEYPAD’S KEYS ACCORDING TO EACH MODE
The Hydran 201T i ’s keypad is shown in Figure 4-2 on page 4-8. Table 4-4 on page 4-8
summarizes the functions of the keys according to the operating modes.
Display Data Entry Action
Enter Date&Time Press ENTER Start the dialog
Year (Year)
Enter the requested value
Month (Month)
Day (Day)
Hour (Hour)
Minute (Minute)
PowerStat. ID
a
a. For details on these parameters, see Section 4.5.6.5 on page 4-23.
0
Absolutely enter a number (1 to 9999)
H201Ti ID
a
Absolutely enter a number (1 to 254)