manualshive.com logo in svg

GE H5018SC, Technical Publication

Share
Download
GE H5018SC Technical Publication Download Page 71

Networking setup requirements

Invenia ABUS 2.0 – System Setup and Basic Service Manual

2-17

4700-0043-00 Rev. 4

DICOM setup requirements

To configure the Ultrasound system to work with other network 
connections, the site’s network administrator must provide 
information to complete the form “Worksheet for DICOM 
Network Information”. Ensure that there are no spaces in any 
field of the form. 

Entries must include

: 

• 

A host name, local port number, AE Title, IP address and 
Net Mask for the Ultrasound system. 

• 

The IP addresses for the default gateway and other routers 
at the site for ROUTING INFORMATION.

• 

The host name, IP address, port and AE Title for each 
device the site wants connected to the Ultrasound system 
for DICOM APPLICATION INFORMATION. A field for the 
make (manufacturer) and the revision of the device, is also 
included. This information may be useful for error solving.

Summary of Contents for H5018SC























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands