100 | Chapter 8: Maintenance
Quarterly maintenance Checklist
Maintenance check list – 3 Months
(plus daily/monthly checks)
Time interval
Check frame crosshead guide mounting bolts for tightness, shim and re-
torque as required to eliminate any “soft foot” found.
2,000 hours
Examine the external frame and cylinder fasteners for loose or broken bolts.
2,000 hours
Check discharge bottle supports for snug fit adjustment, with compressor
stabilized at normal discharge temperatures.
2,000 hours
Drain pulsation bottles liquids, inlet and discharge.
2,000 hours
Remove and inspect process gas inlet screen strainers.
2,000 hours
FoRm 11
Quarterly maintenance checklist
Semi-annual maintenance Checklist
Maintenance check list- 6 months
(plus daily/monthly/3 months checks)
Time
interval
Compressor crankcase oil, change or as recommended by oil supplier’s
monthly oil analysis. Note: Remove crankcase top cover and inspect
internally for foreign material/debris whenever oil is changed.
4,000 hours
Frame oil filter, change or if different pressure exceeds 10 Psid (69 kpa).
4,000 hours
Inspect cylinder valves for damaged or broken components, rebuild or
replace as required.
4,000 hours
Inspect piston rods and packing.
4,000 hours
Clean crankcase breather.
4,000 hours
Repeat the cylinder wall oil film test until satisfactory oil film achieved.
4,000 hours
FoRm 12
Semi-annual maintenance checklist
Summary of Contents for H301 Series
