HOW TO CHANGE COLOR PANELS
you can change your
dishwasher’s front
panels to match or
blend with your new colors.
The panel is held in place by
If you are redecorating,
the door trim and the trim on
---
. .
. . . .
the panel below the door. Each
side of each panel is a different color. Or you
can paint a panel with the color of your own choice.
NOTE: Do not operate the dishwasher while changing
panels or when lower access panel is removed.
How to change door panel insert:
1. Take out trim screws on either side of
the dishwasher door. Remove the side trim.
2. Slide out the insert panel.
3. Put the color you want in front.
maybe sharp).
4. Replace the insert panel, side trim and screws.
How to change the lower panel:
1. Remove panel attachment screws.
2. Remove the entire panel.
3. Take out screws and remove the top trim.
4. Slide the door
out.
5. Turn the panel around and put the color you want in
front.
6. Replace the
panel, top trim and screws.
7. Replace the entire panel and attachment screws.
Color panels can be replaced by 1/4” thick wood
inserts to match your kitchen cabinets. Get them from
your nearest cabinet or lumber dealer.
Dimensions for 1/4” wood inserts:
Door panel:
H x
W.
Lower panel:
H x
W.
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
DISHWASHER
WON’T RUN
UNUSUAL NOISE
DISHES DON’T DRY
UNCLEAN DISHES
AND FLATWARE
POSSIBLE CAUSE
A fuse in your home may be blown, or the circuit breaker tripped. Replace fuse or
reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be secure on rack pins, or something small may have dropped from
the rack. Water is causing utensils to rattle. Make sure everything is securely placed
in dishwasher.
Make sure inlet water temperature is correct. (See How to Test Water Temperature
section).
Unload the bottom rack
Water from dishes in the top rack may be spilling into
the bottom rack.
Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
Check the rinse agent dispenser to see that it’s not empty.
Check inlet water temperature. It
be at
(To test, see How to Test
Water Temperature section).
Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower
than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See Care and Cleaning section).
Improper rack loading. (See Loading section).
12
