Page 1: ...entry skills Wear your safety equipment when using tools and handling parts for your protection Proper installation is the responsibility of the installer PARTS SUPPLIED Fq End panel Toekick panel D Panel support bracket 2 8 x 3 4 wood screws 4 10 x 1 wood screws E 4 1 4 x 3 8 machine screws 4 1 4 nuts 4 1 4 lock washers D 2 3 16 x 3 toggle bolt screws 2 3 16 toggles 6 3 16 flat washers D Insta la...
Page 2: ... necessary to make adjustments in the installation of this panel to ensure the dishwasher will fit properly in the opening L Figure A STEP 2 LAY OUT MOUNTING HOLES FOR TOEKICK PANEL The rear mounting hole must be 3ol 4 from the back of the opening and 23 1 2 from the opposite side The front mounting hole must be 19 from the back of the opening and 23 1 2 from the opposite side Mark these two screw...
Page 3: ...o lag bolts of appropriate size and length along with 2 flat washers to fasten the toekick panel to the floor STEP S LOOSELY INSTALL SIDE PANEL Mount the side panel to the toekick panel and panel support bracket using four 1 4 x 3 8 machine screws 4 lock washers and four 1 4 nuts Do not tighten the fasteners at this time Figure E Figure F STEP 7 DETERMINE WALL COMPOSITION If wall is solid or there...
Page 4: ...emaining two 1 4 machine screws through the side panel and toekick panel Install the lock washers and 1 4 nuts on the machine screws but do not tighten STEP iO TIGHTEN THE FASTENERS Tighten the fasteners in this order 1 Toggle bolts or wood screws on back of panel if present 2 Machine screws on top of panel 3 Machine screws on bottom of panel Tighten Figure H imc ginc tion It work SPECIFICATIONS S...
