GE GEH-ECG 1200, User Manual

Page: 12 / 16

ECG Cables and Accessories
Page 12 2102322-111 REV 1
ECG Cables and Accessories
Accessories Part Number
Leadwires with Snaps IEC 2102322-011
Leadwires with Snaps AHA 2102322-012
Leadwires with Clips IEC 2102322-013
Leadwires with Clips AHA 2102322-014
Black belt for 1200W acquisition unit 2102322-015
USB cable 3m for 1200WR Receiver 2102322-053
BNC cable 3m for 1200WR Receiver 2102322-054
Technical Specifications
1200W (Acquisition unit)
ECG Lead system Standard 12 Lead
Patient Leads Detachable 10 Lead wires conform to AAMI
Defibrillation protection Protected against 360J discharge
Patient leakage current < 10 uA
Input impedance > 10 MOhm
CMMR > 90dB
Frequency range 0.05 – 150Hz
Dynamic range +/- 2.4V
Resolution 24 bits (0.286 uV/LSB)
Sample Rate Internal 8000
Sample Rate Recording 500
Lead OFF Detection Yes
Communication Digital RF 2400 – 2483 MHz,
0.4mW, conform to FCC Part 15.249
Power Battery Size AA x 2, Alkaline or NiMH
Operation time Up to 40 hours with Alkaline Batteries
Mechanical Size 140 x 95 x 50 mm
Weight 350g
Environmental Operating Temp. Range 10 to 40 °C
Storage Temp. Range -20 to 60 °C
Relative Humidity 10 to 95 % (non-condensing)
1200WR (Receiver)
Auxiliary output ECG Out Bandwidth (-3db) 0.5 to 150 Hz
ECG Out Gain 1000
ECG Out Sample Rate 500
TTL Trigger width 16-128ms
TTL Trigger delay <11ms (delay from R-wave)
Communication USB USB2.0 Full Speed
Digital RF 2400 – 2483 MHz,
0.4mW, conform to FCC Part 15.249
Power USB 5V 100mA max at 5V input
Mechanical Size 100 x 54 x 30 mm
Weight 80g
Environmental Operating Temp. Range 10 to 40 °C
Storage Temp. Range -20 to 60 °C
Relative Humidity 10 to 95 % (non-condensing)
Regulatory Safety Standards IEC 60601-1, 60601-1-2, 60601-2-25
Classification Type CF with defibrillation proof. Internally powered
Certification CE, FDA