background image

Summary of Contents for GDSS0KCXBRSS and

Page 1: ...ructions and reverse all references to left and right Once door swing is finalized ensure the logo badge is properly aligned and permanently secured to the door by removing the adhesive cover on the back side NOTE A replacement logo badge is included in the hinge kit Unplug the refrigerator from its electrical outlet Emptg all door shelves including the dairg compartment TOOLS YOU WILL NEED Adjust...

Page 2: ...ve hinge pin from hinge bracket This will be used again with the new hinge bracket for the other side re Remove the tape and tilt the door away from the cabinet Lift the door off the bottom hinge pin r_l REMOVE THE FREEZER DOOR For models with freezer door cont r_ Remove the button plug from the left side of the door Remove the door thimble from the right side of the door Install the door thimble ...

Page 3: ... freezer door I_1 Using a 1 2 socket ratchet driver install the hinge pin and nut in the opposite hole on the hinge bracket with leveling leg B INSTALL BOTTOM HINGE AND LEVELING LEG For models with freezer door cont Using a 5 16 socket ratchet driver install the hinge bracket with leveling leg on the left side of the refrigerator The pin will be toward the outside of the refrigerator Using a 5 16 ...

Page 4: ...enter hinge pin Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door D REHANG REFRIGERATOR DOOR cont Insert the door thimble into the hinge hole on top of the refrigerator door and then insert the top hinge pin Make sure the door is aligned with the cabinet Attach the hinge to the top of the cabinet Ioosek with the bol...

Reviews: