Save protocol
Action
Step
Check that the desired protocol name is entered in the Protocol name box.
Tip:
Name the protocol according to user name_strip length_pH range (upper
limit 16 characters).
1
Click the middle of the three buttons in order to save the protocol. A Save
as dialog is opened. Change protocol file name and protocol directory folder,
if desired.
2
Note:
If the name of an edited protocol will be overwritten it will be lost.
Download protocols to a
specific position
Ettan IPGphor 3 can store up to ten protocols.
Action
Step
To download a protocol to the Ettan IPGphor 3 at another position than po-
sition 1, select menu Protocol:Transfer protocol. and select desired Instru-
ment position (1-10).
1
Click OK.
2
The current protocol is now downloaded to the selected position in
Ettan IPGphor 3. Any existing protocol at that position is overwritten.
Ettan IPGphor 3 Operating Instructions 28-9635-51 AC
95
5 Operation
5.4 Run a pre-programmed protocol from the PC
5.4.1 Setting up a run
