4–10
EPM 5100 ELECTRONIC POWER METER – USER GUIDE
CHAPTER 4: PROGRAMMING
choices may be made; if period is chosen, only X and blank are available at the next
position. Choosing a blank at any position jumps the cursor to the units multiplier, which
toggles among ' ', 'k' (kilo), or 'M' (mega). Press
↵
one more time to confirm your choice. The
available formatting choices are
XXX
XXX.X
XXX.XX
XXX.XXX
XXXX
XXXX.X
XXXX.XX
XXXXX
XXXXX.X
XXXXXX
4.4.5
Voltage Format
Press
↵
to show the format for displaying voltage values:
The voltage format is selected in the same way as the demand format, with the same
choices available, except that M is not available as a units multiplier.
4.4.6
Current Format
Press
↵
to show the format for displaying current values:
The current format is selected in the same way as the voltage format, with the same
choices available.
4.4.7
Leading Zeros
This function determines whether parameter values will be displayed with leading LCD
positions filled with zeros. Press
↵
to display the two choices:
Scroll between the two options, then press
↵
to select your choice.
4.4.8
Scroll Time
Press
↵
to display the time that each parameter is displayed during automatic scroll in
Metering mode:
Volt Format:
XXX_
’ ’
Amp Format:
XXX_
’ ’
Leading Zeros:
WITHOUT ZEROS
Leading Zeros:
WITH ZEROS
