GE Druck DPI 620, User Manual

Page: 40 / 84

Issue 1
3-2 Electrical and IDOS operations K0449 - [EN] English
•
If necessary, change the Process for the CH1 and/or CH2
measure functions: item
This includes: Tare , Alarm , Filter , Flow , Scaling ; see
Section 2.11.1 .
There are more optional Settings for the TC , Frequency , and
RTD functions.
•
If necessary, change the Automation options for the CH1
and/or CH2 source functions: item
This includes: Nudge , Span Check , Percent Step ,
Defined Step , Ramp ; see Section 2.11.2
There are more optional Source Settings for the TC ,
Frequency , and RTD functions.
There are other Settings for Observed functions; see
Section 2.11.3 .
•
When all the software selections are complete, make the
applicable electrical connections.
3.2.2 Example procedure: Measure or source current
These examples (A and B) show Channel 1 (CH1) set up to
measure or source a current with external loop power.
Note: If you use the Channel 2 (CH2) connectors, you can use
Channel 2 to measure or source these ranges with internal or
external loop power (internal loop power = 24 V).
1
D
TAP
D
1
E
TAP
E
2
Maximum: 30V
Source current on
channel 1 (CH1)
Range: 0 to 24 mA
Automation : Nudge
( Section 2.11.2 )
2
Maximum: 30V
1
B
3
Measure current on
channel 1 (CH1)
Range: ±55 mA
A
1