GE DR60, Technical Manual

Page: 123 / 124

DR60-TM-EN- 2A 123
DR60
Digital Recorder
Appendix A – Equipment Log
1 Equipment Log
The equipment log contains information about:
•
Threshold violations, fault and disturbance triggers and data recording;
•
Data record transfer (including the IP address to which data has been
transferred);
•
Access to the unit's configuration pages (including IP address of which the
access was performed);
•
Alarms and the results of auto-diagnosis routines;
•
Power-up and shutdown.
The equipment log cannot be erased by the user. Its capacity is enough for
approximately 5 years of typical use, with past events being erased if memory space is
needed.
Code Message
LX01 First Installation
LX02 Applied new settings to IED
LX03 Restored last valid settings
LX04 Downloaded settings from IED
LX05 Downloaded support file from IED
LX06 Downloaded user event logs from IED
LX07 Physical Health changed to ?, cause: ?
LX08 Software upgraded from ? to ?:
LX09 Applied new license to IED
LX10 Card failure: slot ?
LX11 Internal voltage: expected ? V, measured ? V, condition: ?
LX12 Temperature: ? ºC, condition: ?
LX13 Returned internal image to ?
LX14 Power up
LC01 Ethernet link status
LC02 Ethernet port settings changed to IP: ?, submask: ?, gateway: ?
LC03 Serial port settings changed to speed: ? bps, data bits: ?, parity: ?, stop bits: ?
LC04 GOOSE Timeout