Chapter 2. Instrument Setup
70
DMS Go Operator’s Manual
2.6 Using the Calibration Reminder Alarm (PROBE & CAL - CAL REMINDER)
The
DMS Go
incorporates a timed alarm feature that causes an icon to appear on user-defined input intervals. To use this alarm:
1.
In the
MAIN
menu, scroll to the
PROBE & CAL
submenu using the joystick (
).
2.
Use the joystick (
) to select the function titled
CAL
REMINDER
. The
CALIBRATION REMINDER CONFIG
window opens. Input
the mode, or the parameter that will trigger the reminder (
TIME IN MINUTES, NUMBER OF READINGS, POWER ON,
and
OFF
) and then
the value the reminder alarm will trigger. Setting this value automatically resets the alarm to trigger on the specified intervals. This
function also allows the alarm to be disabled (
OFF
).
3.
Press the function toggle or move the joystick (
) to change the alarm interval.
4.
Press F2 (
CONFIRM)
to acknowledge the triggered alarm and reset it to resume normal operation or F 4
(EXIT)
to close the window
without changing the alarm setting.
Note:
The selection of the
VELOCITY
function also resets the alarm.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980