26
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after
a power failure.
12 Hour Shut-Off
With this feature, should you forget and leave
the oven on, the control will automatically turn
off the oven after 12 hours during baking
functions or after 3 hours during a broil function.
If you wish to turn
OFF
this feature,
follow the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
DELAY START
pad.
The display will show
12 shdn
(12 hour
shut-off). Touch the
DELAY START
pad
again and the display will show
no shdn
(no shut-off).
Touch the
START
pad to activate
the no shut-off and leave the control
set in this special features mode.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change
this to use the Celsius selections.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
BROIL HI/LO
pad. The display
will show
F
(Fahrenheit).
Touch the
BROIL HI/LO
pad again.
The display will show
C
(Celsius).
Touch the
START
pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the CLEAR/OFF pad is touched. This
continual 6-second beep may be canceled.
To cancel the 6-second beep:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continual beep). Touch the
KITCHEN
TIMER ON/OFF
pad again. The display
shows
BEEP.
(This cancels the one beep
every 6 seconds.)
Touch the
START
pad.
Special features of your upper oven control.
O
p
e
ra
ti
n
g
In
st
ru
c
ti
o
n
s
S
a
fe
ty
I
n
st
ru
c
ti
o
n
s
C
a
re
a
n
d
C
le
a
n
in
g
In
st
a
ll
a
ti
o
n
In
st
ru
c
ti
o
n
s
T
ro
u
b
le
sh
o
o
ti
n
g
T
ip
s
C
o
n
su
m
e
r
S
u
p
p
o
rt
Summary of Contents for CS980SNSS
Page 52: ...52...