Chapter 3: Programming
50
Concord 4 Installation Manual
Backup
Shortcut: 01005, 01015,
and 01025
Default: On (1),
Off (2 and 3)
This setting determines whether the panel uses another programmed
central station phone number for reporting if attempts with the first number
are unsuccessful.
When backup is off, the panel makes up to eight attempts to deliver a report
with the programmed phone number. When backup is set to on, the panel
makes up to 16 attempts to deliver the report, alternating between the
programmed phone number and the backup phone number. Central station
phone 1 is backed up by central station phone 2. Central station phones 2
and 3 are backed up by central station phone 1.
SIA/CID reporting
Shortcut: 01006, 01016,
and 01026
Default: CID
This setting determines whether the panel uses the SIA (press 1) or CID
(press 2) reporting format for central station communication.
Cellular backup
Shortcut: 01007, 01017,
and 01027
Default: On (1),
Off (2 and 3)
This setting determines whether the panel uses cellular communication for
reporting if attempts using a landline are unsuccessful.
Phones - pager phone 1 to 5 settings
Cellular backup
Shortcut: 01030, 01040,
01050, 01060, and
01070
Default: None
This feature programs a phone number that communicates to a pager.
Phone numbers can be 1 to 24 digits long and include pauses, a sky link
number, and 7-digit PIN code.
Call-waiting services should be disabled to prevent interrupting panel
communication to the pagers. To program a dialing prefix that disables call
waiting, see the call wait cancel setting under the “Phone options - global
settings” on page 52.
To delete a pager phone number, with the display showing
PHONE
NUMBER
(current number), press D. The display shows
PHONE NUMBER
_.
High level reports
Shortcut: 01031, 01041,
01051, 01061, and
01071
Default: On
This setting determines whether the following alarm conditions report to a
pager:
• Fire, police, auxiliary, and duress alarms
• No activity
• Receiver failure (or jam)
• Tamper conditions, including zone tampers and system tamper (40
incorrect key presses or touchpad supervisory)
• Entering or exiting sensor test mode
• Phone test
