Page 1: ... future conversion back to natural gas C Remove the LPorifice spuds from the box provided The LP orifice spuds have the letter L on the top To aid in identifying the proper location for the LPorifices during a conversion from Natural Gas to LPGas paint color codes have been added to the side or top of the orifice See the chart below Each orifice may also show a series of engraved marks I II III lo...
Page 2: ...is procedure prevents the low flame from being set too low resulting in the flame being extinguished when other burners are turned on A Turn on all surface burners B Turn the knob on the burner being adjusted to LO LOW or SIM SIMMER C Remove the knob and insert a small flat blade screwdriver into the valve shaft as shown and turn clockwise to fully tighten down the bypass screw Repeat for each scr...
