GE Centricity RA600, Service Manual

Page: 45 / 278

Hardware Installation IST 005 (C) 1280 x 1024 Landscape Monitor Interconnections
Page 45
n
IST 005 (C) 1280 x 1024 Landscape Monitor Interconnections
Section 1: Introduction
This job card contains the instructions for interconnecting the Workstation to other equipment and
components as part of the installation. Monitor cabling diagrams are provided to show the
interconnection of one or two landscape monitors to the appropriate video board slot positions at the
rear of the computer housing.
Section 2: Prerequisites
The site must be prepared for installation of the workstation. Refer to the Centricity RA600
Workstation Technical Reference Manual for detailed information.
u The appropriate line voltage, line frequency, and power supply line cords.
u
Ethernet connection.
u
Appropriate furniture for the Workstation (i.e. desk, chair, etc.).
Section 3: Cabling
Table 3-5 lists the part numbers of interconnecting cables used during installation.
Refer to Illustration 1-3 to see where various connectors are located on the computer housing. Refer
to included manufacturer’s documentation for access to flat panel connectors.
Caution
!
The maximum magnetic field allowable for installing the Centricity
RA600 Workstation is 1 gauss to ensure proper operation.