GE CASE V6.7 Operator'S Manual Download Page 137

Page: 137 / 342

Revision C

CASE

6-29

2060290-201

Test End Phase

Test End Phase

Overview

1. Press the

test end

button to end the test and start the test end

phase.

2. Click

Yes

to confirm the test end. The Interpretation window appears

with the patient's ECG waveforms below.

Note

After you press the

test end

button, the following happens:



The system no longer acquires and stores ECG measurement
data.



The clocks stop.



Workload, speed, and grade no longer display.

Operating Steps

1. Enter or select the

Reasons for Termination

(multiple selections are

permitted).

2. Select the

Angina Index

which is necessary to calculate the Duke

Treadmill Score.

3. Enter or select summary statements (multiple selections are

permitted).

4. Enter the

Conclusion

5. Click

Modify...

to edit the Duke Treadmill Score (see

“Duke

Treadmill Score”

on page B-9). Enable the Duke TM Score : to

include it in the Test Results and in the Final Report.

6. Confirm the test results.

7. Click

to clear the window. The Interpretation window and the

test end menu tabs appear.

67A-S

Summary of Contents for CASE V6.7























































































































































































































































































































































Search results

Summary of Contents for CASE V6.7

Reviews:

Related manuals for CASE V6.7

Brands by name

Popular brands

GE CASE V6.7, Operator'S Manual

Search results

Summary of Contents for CASE V6.7

Reviews:

Related manuals for CASE V6.7

Brands by name

Popular brands