GE CARESCAPE, User Manual

Page: 423 / 548

Trends
4. Select a value from the Minitrend Length list.
●
The 1 minute and 2 minute minitrends (high-resolution license) are updated
every 2 seconds.
●
The 5 minute and 10 minute minitrends are updated every 10 seconds.
●
Other lengths are updated once a minute.
Selecting high-resolution contents to minitrend
If the high-resolution license is enabled and the 10 min wide is 1 minute normal or
2 minutes wide, you can select CO
2
and impedance respiration (10Hz) Compressed
Waveform minitrends or Resp Rate minitrends.
1. Select Monitor Setup > Screen Setup .
2. B850 and B450 with Double Video license: Select Screen 1 or Screen 2 tab.
3. Select the Split Screen tab.
4. Select Minitrend from the Show list.
a. Select Resp Rate from the CO2 Minitrend or from the Imp. Resp Minitrend list.
b. Select Compressed Waveform from the CO2 Minitrend or from the Imp. Resp
Minitrend list.
Removing minitrend from the screen
1. Select Monitor Setup > Screen Setup .
2. B850 and B450 with the Double Video license: Select Screen 1 or Screen 2 tab.
3. Select the Split Screen tab.
4. Select the None from the Show list.
Time change during a patient case
CAUTION
System time changes will result in time differences between
stored and realtime data.
Time adjustment is allowed during a patient case if the monitor is configured to the
CARESCAPE Network. When the time is adjusted, the monitor shifts the timestamps of
continuous trend data and of discrete data, except NIBP and wedge measurements.
After time adjustment continuous and discrete data cannot be compared to each
other because their timestamps no longer match.
2062971-001 CARESCAPE Modular Monitors 423